自掺杂SnO2微球的水热合成及其可见光催化性能

本研究采用水热法,以柠檬酸为螯合剂,通过控制n(Sn⁴⁺)/n(Sn²⁺)的数值,合成了由具有丰富氧空位的SnO₂纳米晶体组装成的微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)及UV-Vis漫反射光谱对SnO₂纳米微球进行表征分析,结果表明:在酸性水热条件和柠檬酸的螯合作用下,二氧化锡纳米晶体聚集形成微球;在Sn⁴⁺/Sn²⁺摩尔比例为3:7时,其微球尺寸最小,整体分散性较好;同时适量二价锡离子的掺杂使得该样品氧空位浓度达到最佳,氧空位的存在将使得样品光吸收范围拓展至可见光,因而该样品显示出较强的可见光催化效率,在8 min内完全降解甲基橙。     

Freeze–Thaw-Promoted Fabrication of Clean and Hierarchically Structured Noble-Metal Aerogels for Electrocatalysis and Photoelectrocatalysis

Noble-metal aerogels (NMAs) have drawn increasing attention because of their self-supported conductive networks, high surface areas, and numerous optically/catalytically active sites, enabling their impressive performance in diverse fields. However, the fabrication methods suffer from tedious procedures, long preparation times, unavoidable impurities, and uncontrolled multiscale structures, discouraging their developments. By utilizing the self-healing properties of noble-metal aggregates, the freezing-promoted salting-out behavior, and the ice-templating effect, a freeze–thaw method is crafted that is capable of preparing various hierarchically structured noble-metal gels within one day without extra additives. In light of their cleanliness, the multi-scale structures, and combined catalytic/optical properties, the electrocatalytic and photoelectrocatalytic performance of NMAs are demonstrated, which surpasses that of commercial noble-metal catalysts.     

Probing nanocolumnar silver nanoparticle/zinc oxide hierarchical assemblies with advanced surface plasmon resonance and their enhanced photocatalytic performance for formaldehyde removal

Recent advances in photocatalysis focus on the development of materials with hierarchical structure and on the surface plasmon resonance (SPR) phenomenon exhibited by metal nanoparticles (NPs). In this work, both are combined in a material where size‐controllable Ag‐NPs are uniformly loaded onto the hierarchical microporous and mesoporous and nanocolumnar structures of ZnO, resulting in Ag‐NP/ZnO nanocomposites. The embedded Ag‐NPs slightly decrease the hydrophobicity of fibrous ZnO, improve its wettability, and increase the absorption of formaldehyde (H₂CO) onto the photocatalyst, all of this resulting in excellent photodegradation of formaldehyde in aqueous solution. Besides, we found that Ag‐NPs with optimal size not only accelerate the charge transfer to the surface of ZnO, but also strengthen the SPR effect in the intercolumnar channels of fibrous ZnO particles combining with high concentration of photo‐generated radical species. The micro‐to‐mesoporous ZnO is like a nanoarray packed Ag‐NPs. With Ag‐NPs of diameter 2.5 < ? < 6.5 nm, ZnO exhibits the most superior photodegradation rate constant value of 0.0239 min^?1 with total formaldehyde removal of 97%. This work presents a new feasible approach involving highly sophisticated Ag‐NP/ZnO architecture combining the SPR effect and hierarchically ordered structures, which results in high photocatalytic activity for formaldehyde photodegradation.     

A new generation of visible-light-active photocatalysts—The alkaline earth metal bismuthates: Syntheses,compositions, structures,and properties

Semiconductor materials containing bismuth have attracted the attention of researchers over the past several decades, as a result of their high photocatalytic activity in various reactions and/or high efficiency in their photoelectric conversion of solar energy. This interest originated from the observations that bismuth-containing semiconductors have a sufficiently small bandgap, which makes them sensitive to radiation in the visible spectral range; thus, visible-light-active materials. Among the various bismuth-containing semiconductor materials, the bismuthates of alkaline earth metals are distinguished and describe into separate groups. This article reviews research on the known methods of obtaining bismuthates of various alkaline earth metals (magnesium, calcium, strontium, and barium), and further analyzes their composition, structure, and visible-light-active photocatalytic activity.     

Applications of photocatalytic titanium dioxide-based nanomaterials in sustainable agriculture

Photocatalytic materials are attracting attention as emerging resources for agricultural applications. This timely review assesses the current developments in the use of biocompatible titanium dioxide (TiO₂)-based photocatalytic nanomaterials (TiO₂-PN) as models to unravel agricultural growth, harvest, and post-harvest problems. Such developments can lead to technological innovations aimed at addressing the pressing global environmental challenges faced by farming. TiO₂-PN have been used as antimicrobial, growth-regulating, and fertilizer-like agents. The promising agricultural research applications of TiO₂-PN are highlighted along with a discussion of the main challenges that will need to be overcome to fully understand the roles of TiO₂-PN in the sustainable and productive exploitation of land and water for agricultural applications under natural conditions. In particular, rhizosphere internalization, translocation, and plant bioaccumulation pathways of photocatalytic materials from environmental exposition are outlined to illustrate the effect of TiO₂ on the agricultural cycle. Nanotoxicology and regulations are also discussed to illustrate the importance of biocompatibility and green synthesis of nanomaterials for safe use in real applications. This overview is focused on motivating and intensifying our understanding of on-site agricultural studies. Complementary biological approaches and structural damage observed by biological transmission electron, scanning electron, and optical microscopies should accelerate the practical contribution of TiO₂-PN to sustainable agriculture in conjunction with plant factories and plasma nitrogen fixation technology. Loadings below 10 μg/L of TiO₂-PN with a size of 40 nm benefit seed germination and root elongation as well as partially suppressing metal root translocation. However, only approximately 5% of current studies were carried out in real agricultural settings.     

Domino Radical Addition/Oxidation Sequence with Photocatalysis: One‐Pot Synthesis of Polysubstituted Furans from α‐Chloro‐Alkyl Ketones and Styrenes

A new domino reaction has been developed that allows the combination of styrenes and α‐alkyl ketone radicals to afford a wide array of polysubstituted furans in good to excellent yields under mild and simple reaction conditions. The key to success of this novel protocol is the use of photocatalyst fac‐Ir(ppy)₃ and oxidant K₂S₂O₈. Mechanistic studies by a radical scavenger and photoluminescence quenching suggest that a radical addition/oxidation pathway is operable.     

Determining the Zn Content of Cherry in Field Using VNIR Spectroscopy

Visible and near-infrared(VNIR)spectroscopy is an eco-friendly method used for estimating plant nutrient deficiencies.The aim of this study was to investigate the possibility of using VNIR method for estimating Zn content in cherry orchard leaves under field conditions.The study was conducted in 3different locations in Isparta region of Turkey.Fifteen cherry orchards containing normal and Zn deficient plants were chosen,and 60 leaf samples were collected from each location.The reflectance spectra of the leaves were measured with an ASD FieldSpec HandHeld spectroradiometer and a plant probe.The Zn contents of leaf samples were predicted through laboratory analysis.The spectral reflectance measurements were used to estimate the Zn levels using stepwise multiple linear regression analysis method.Prediction models were created using the highest coefficient of determination value.The results show that Zn content of cherry trees can be estimated using the VNIR spectroscopic method(87.5相似文献   

The Reductive Dehydration of Cellulose by Solid/Gas Reaction with TiCl4 at Low Temperature: A Cheap,Simple, and Green Process for Preparing Anatase Nanoplates and TiO2/C Composites

Metal oxides and metal oxide/carbon composites are entering the development of new technologies and should therefore to be prepared by sustainable chemistry processes. Therefore, a new aspect of the reactivity of cellulose is presented through its solid/gas reaction with vapour of titanium(IV) chloride in anhydrous conditions at low temperature (80 °C). This reaction leads to two transformations both for cellulose and titanium(IV) chloride. A reductive dehydration of cellulose is seen at the lowest temperature ever reported and results in the formation of a carbonaceous fibrous solid as the only carbon‐containing product. Simultaneously, the in situ generation of water leads to the formation of titanium dioxide with an unexpected nanoplate morphology (ca. 50 nm thickness) and a high photocatalytic activity. We present the evidence showing the evolution of the cellulose and the TiO₂ nanostructure formation, along with its photocatalytic activity. This low‐temperature process avoids any other reagents and is among the greenest processes for the preparation of anatase and also for TiO₂/carbon composites. The anisotropic morphology of TiO₂ questions the role of the cellulose on the growing process of these nanoparticles.     

Eosin Y (EY) Photoredox‐Catalyzed Sulfonylation of Alkenes: Scope and Mechanism

Alkyl‐ and aryl vinyl sulfones were obtained by eosin Y (EY)‐mediated visible‐light photooxidation of sulfinate salts and the reaction of the resulting S‐centered radicals with alkenes. Optimized reaction conditions, the sulfinate and alkene scope, and X‐ray structural analyses of several reaction products are provided. A detailed spectroscopic study explains the reaction mechanism, which proceeds through the EY radical cation as key intermediate oxidizing the sulfinate salts.